NetBSD/c26xx
Cisco 2611XM で NetBSD を動かしました。
まだまだだけどとりあえず。
<![CDATA[
System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Copyright (c) 2003 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory
rommon 1 > tftpdnld -r
IP_ADDRESS: 10.9.2.19
IP_SUBNET_MASK: 255.255.255.0
DEFAULT_GATEWAY: 10.9.2.2
TFTP_SERVER: 10.9.2.2
TFTP_FILE: boot.c26xx
.
Receiving boot.c26xx from 10.9.2.2 !!!!!!!!
File reception completed.
program load complete, entry point: 0x80c00000, size: 0xa698
>> NetBSD/mpc860 Boot, Revision 1.1
>> (tsubai@sakura, Wed May 30 19:13:14 JST 2012)
(type SPACE to halt)...
Using IP address: 10.9.2.19
root addr=10.9.2.2 path=/e/c26xx
2122684+107292 [141984+125470]=0x261fd8
start=0x10000
ssym = 2306d8, kend = 27a000
NetBSD 6.99.6 (C2600) #236: Tue Jun 5 22:21:59 JST 2012
tsubai@sakura:/a/0501/src/sys/arch/c26xx/compile/C2600
total memory = 128 MB
avail memory = 122 MB
mainbus0 (root): 2611XM
cpu0 at mainbus0: 860 (Revision 0)
cpm0 at mainbus0
obio0 at mainbus0
com0 at obio0 addr 0xffe00000 vec 2: ns16550a, working fifo
com0: console
com1 at obio0 addr 0xffe00008 vec 2: ns16550a, working fifo
xlxhb0 at mainbus0
pci0 at xlxhb0 bus 0
pcn0 at pci0 dev 0 function 0: AMD PCnet-PCI Ethernet
pcn0: Am79c977 PCnet-PRO rev 4, Ethernet address 00:14:69:90:38:00
pcn0: interrupting at irq 6
lxtphy0 at pcn0 phy 0: LXT971/2 10/100 media interface, rev. 2
lxtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcn1 at pci0 dev 1 function 0: AMD PCnet-PCI Ethernet
pcn1: Am79c977 PCnet-PRO rev 4, Ethernet address 00:14:69:90:38:01
pcn1: interrupting at irq 6
lxtphy1 at pcn1 phy 0: LXT971/2 10/100 media interface, rev. 2
lxtphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcn2 at pci0 dev 4 function 0: AMD PCnet-PCI Ethernet
pcn2: Am79c970A PCnet-PCI II rev 6, Ethernet address 00:14:69:90:38:10
pcn2: interrupting at irq 6
pcn2: 10base5, 10base5-FDX, 10baseT, 10baseT-FDX, auto, auto-FDX
pchb0 at pci0 dev 15 function 0: XILINX Host-PCI Bridge (rev. 2)
boot device: pcn0
root on pcn0
nfs_boot: trying DHCP/BOOTP
nfs_boot: DHCP next-server: 10.9.2.2
nfs_boot: my_name=cisco2611
nfs_boot: my_addr=10.9.2.19
nfs_boot: my_mask=255.255.255.0
nfs_boot: gateway=10.9.2.2
root on sakura:/e/c26xx
root file system type: nfs
Enter pathname of shell or RETURN for /bin/sh:
# date
Tue Jun 5 22:23:02 JST 2012
#
]]></plaintext></p></body></div>